Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio).
This harness also allows you to keep your factory steering wheel controls and use them with your aftermarket radio.
Standard Wire Harness This wire harness is compatible with standard wiring only.
Premium Wire Harness Module This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features #3.
Premium Wire Harness Module w/ Steering Wheel Control This wiring harness allows models with Factory Amplified Systems or CAN Bus Factory Radios REF, REC, RAQ and RAK (names can be found of front of radio) to replace Factory Radios while retaining all necessary safety and warning features.
This cable allows you to connect rear view cameras in Mazda cars with OEM MZD Connect multimedia system .
Image from the rear view camera will automatically be displayed on the screen when reversing.
After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.
Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used.
The cable offers Plug&Play installation of aftermarket cameras without damaging the OEM wiring.
The device is connected to the 28 pin socket (marked red on the picture).
Note! Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active.
If the camera requires more than +6 V it should be connected to the ACC line.
CompatibilitySystem: MZD Connect with OEM navigation system MZD Connect without OEM navigation system BOSE or other manufacturer audio systemMazda Models: Mazda 2 2014- Mazda 3 2014- Mazda 3 Sedan 2014- Mazda 6 2015- Mazda CX-3 2014- Mazda CX-4 2016- Mazda CX-5 2015- Mazda CX-7 2017- Mazda CX-9 2015- Mazda MX-5* 2014- Mazda Miata* 2016-Additional compatibility conditions: 7 ” OEM monitor *Camera will most probably have to be powered up directly from the ACC line as the head unit does not output the required +6 V.