Top 10 Best wire tracer 2018

So you have decided to Buy wire tracer and you are looking for the wire tracer to use?

Yeah I know!

So,

What if I tell you that choosing the perfect wire tracer should not be so confusing?

Even though there are a lot of wire tracer out there on the market?

Sounds interesting right?

Well, we have spent more than 10 hours on researching and reviewing these wire tracer!

I have one promise to make!

If you buy the one which we suggest, then you will surely be having the best wire tracer!

Sounds Interesting?

Have a quick glance at wire tracer!

Best wire tracer 2018 – Editior Choice!

So here is our list of the Top 10 wire tracer

1. Meterk Wire Tracker RJ11 RJ45 Line Finder Handheld Cable Tester Multifunction

▲WIRE TRACING FUNCTION: Trace RJ11, RJ45, cables or other metal wire (via adapter). EASY & CONVENIENT TO OPERATE: Work perfectly when the RJ11 RJ45 cable is on power.

By :- Meterk

  • Line level or positive and negative polarity detection: the DC level of the line or positive and negative polarity detection, only the transmitter can be detected.
  • Wire off (path) detection: cable use type enhancement, multi-function, wide range of use, can detect the status of line connectivity.
  • Line function: the line detection is on the line of the open, shorted, wrong, reverse the physical connection detection, cable type for enhanced, multi-function, wide range of use.
  • Specifications:Distance of Emitting Signal: >3000 meters Safety Class: IEC61010 -1 600V CAT Ⅲ, pollution class Ⅱ RoHS CE FCC WEEE Emitter Size: 130 x 65 x 60mm / 5.
  • Features:Tracer function: Tracer function is it can help you quickly find the line pairs in many pairs, this instrument is suitable for RJ45 interface internet cable, RJ11interface telephone line, for other metal wire hunt through adapter adapter.

    Telephone line test: the work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state.

    48ozPackage List:1 x Emitter 1 x Receiver 1 x Pair of Earphone 1 x RJ11 Clip Adapter Cable 1 x RJ45 Cable 1 x Storage Bag 1 x User Manual (English + French + German + Italy + Spanish) 1 x 6F22/9V Battery for Emitter1 x 6F22/9V Battery for Receiver.

    2. Sperry Instruments ET64220 Wire Tracker Wire Tracer, Audio / Video Installers

    APPLICATION: Wire-tracer is a must-have tester for audio/video installer and data com technicians

    By :- Sperry Instruments

  • The condition of electrical installations can be established when contractors use test equipment.
  • Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate.
  • Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
  • This multi-purpose wire tracer is able to identify a variety of wires including CAT 5, coax, speaker, phone and any non-energized wires.
  • Sperry Instrument’s testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate.
  • Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity.
  • Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment.
  • This wire-tracer is a must-have tester for audio/video installer and data com technicians.
  • 3. Wire Tracer & Circuit Tester With RJ-11 Plug And Alligator Clips (Tone And Probe

    Identification of telephone tip and ring lines; detection of line condition: clear, busy, or ringing

    By :- PTE

  • This Wire Tracer and Circuit Tester – including a sender and a detector – is designed to identify and trace wires or cables without damaging the insulation.
  • Use as a Wire TracerBy sending a signal down the wire being tested, you can trace the wire with the detector probe.
  • Even when you have a bundle of wires, you can still find the wire you wish to trace with the help of the volume knob.
  • Specifications:Maximum length of cable tested: Allows for sending tone up to 328 feet / 100 meter (the wire being traced is connected to power)Frequency (nominal): 1.
  • 4 kHz for Sender; more than 30 Hz for DetectorPower: 2 x 6F22/9V batteries (not included)Dimensions and Weight: Sender: 2.
  • Packaging Contents: Detector, sender with RJ-11 plug and 2 alligator clips, manual.
  • Use as Circuit TesterConnect two alligator clips to the ends of the wire to check if resistance exists.
  • You can use the Wire Tracer function to locate the problem.
  • An audible tone will increase in volume as the probe gets closer to the wire.
  • 3 oz / 95gNote: Do NOT connect to a DC circuit exceeding 42 volts or an AC circuit exceeding 24 volts.
  • For telephone lines, the Wire Tracer and Circuit Tester can identify Tip and Ring lines and determine the status of the line – clear, busy, or ringing – making it more convenient to maintain telephone lines.

    4. Wire Tracker,RJ11 RJ45 Line Finder Cable Tester For Network LAN Ethernet Cable

    ✅VERIFY LAN CABLE CONDITON – Plug one side of the cable into the emitter and the other side into the receiver, it can trace cable assignment and cable state (2-wire), also can be used test physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection. It can take place of cable tester.

    By :- Acekool

  • An audible tone will increase in volume as the probe gets closer to the wire.
  • 0V,the STATUS indicator and the VERIFY indicator of the emitter can flash at the same time.
  • operating current:Emitter ≤10mA; Receiver≤30mA 3.
  • Use as Circuit Tester Connect two alligator clips to the ends of the wire to check if resistance exists.
  • You can use the Wire Tracer function to locate the problem.
  • Use as a Wire Tracer By sending a signal down the wire being tested, you can trace the wire with the detector probe.
  • Even when you have a bundle of wires, you can still find the wire you wish to trace with the help of the volume knob.
  • Low Battery Capacity Indication  Move the function selector switch of the emitter to the “SCAN”position,when the cell voltage is below 6.
  • Signal transmission format: Multi-frequency pulse 4Signal output level:8Vp-p 5.
  • ≥3km Typical Applications: Telecommunication network, line engineering and routine maintenance; Computer network line engineering;Other metal wire wiring works and maintenance work; Scope of Applications: Internet Cafe,Hotel network room,Electric power repair,Monitoring installation,Network line engineering Package Includes: 1 * emitter,1 * receiver,1 * earphone,1 * RJ11 adapter,1 * RJ45 adapter,1 * alligator clip adapter,1 * toolkit,1 * user manual,2 * 9V battery.

    5. Noyafa NF-8601W RJ45 LAN Network Cable Tester For RJ45, RJ11, BNC, PING/POE 8

    PoE function: identify which pins are providing power and detect how much voltage

    By :- NOYAFA

  • Perform crosstalk test on network cable to solve the potential problem of slow speed.
  • Quickly find the targeted cable without stripping isolation among unknown cables.
  • Measure length of network cable, coaxial cable, telephone cable.
  • Item Specifics: Is_customized: Yes Brand Name: Noyafa Model Number: NF-8601W Place of Origin: China Port: RJ45, RJ11, BNC Test length: RJ11,RJ45 ,BNC Tracking Type: RJ45, RJ11, BNC , and Metal Cable Other Function: PING test, PoE detect Power: Lithium battery Accessories Included: Built-in Lithium battery x 2 sets telephone line adapter x 1 set network cable adapter x 1 set Cable clips x 1 set.

    Leave a Reply