Top 10 Best miter saw laser guide 2019

So you have decided to Buy miter saw laser guide and you are looking for the miter saw laser guide to use?

Yeah I know!


What if I tell you that choosing the perfect miter saw laser guide should not be so confusing?

Even though there are a lot of miter saw laser guide out there on the market?

Sounds interesting right?

Well, we have spent more than 10 hours on researching and reviewing these miter saw laser guide!

I have one promise to make!

If you buy the one which we suggest, then you will surely be having the best miter saw laser guide!

Sounds Interesting?

Have a quick glance at miter saw laser guide!

Best miter saw laser guide 2018 – Editior Choice!

So here is our list of the Top 10 miter saw laser guide

1. DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw

Includes: a carbide blade, dust bag, blade wrench and comfortable side handles in the base


  • Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability.
  • 0-48 degree to the left and 0-3 degree to the right for increased capacity.
  • Cam lock miter handle with miter detent override deliver quick, accurate miter angles.
  • STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench.
  • 15 amp motor, 4,000 rpm delivers extended power and durability.
  • Tall sliding fence supports crown molding up to 5-1/4″ nested and base molding up to 6-1/2″ vertically against the fence while easily sliding out of the way for bevel cuts.
  • 0-50 degree left and right miter capacity for greater versatility.
  • Lightweight with built-in carry handle for easy portability.
  • 0 amps, 4,000 RPM no load speed, 12″ blade diameter, 5/8 or 1″ arbor size, 6-1/2″ vertical capacity baseboard against fence, 5-1/4″ vertical capacity crown molding vertically nested, 8″ horizontal capacity baseboard lying flat, 6-1/2″ horizontal capacity crown molding lying flat, 2 x 8″ for 45 degree bevel cut capacity (dimensional lumber), 2 x 8″ for 90 degree cross-cut capacity (dimensional lumber), 2 x 8″ max width for 90 degree cross-cut capacity, 4 x 6″ dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs.

    2. DEWALT DW3128P5 80-Tooth 12 In. Crosscutting Tungsten Carbide Miter Saw Blade –

    ACCURATE CUTS: DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter Saw Blade – 2 Pack, helps you make quick, smooth, and accurate cuts.

    By :- DEWALT

  • Whether you’re cutting hardwood, softwood, plywood, or chipboard, the DEWALT DW3128P5 80-Tooth 12 in.
  • Featuring two thin kerf, carbide blades, one with 80 teeth and one with 32 teeth, this set gives you a pair of great options.
  • These blades are built for use with miter saws and slide miter saws.
  • Crosscutting Tungsten Carbide Miter Saw Blade – 2 Pack, helps you make quick, smooth, and accurate cuts.
  • Both blades feature a wedge shoulder design that puts an increased amount of steel behind each blade tip to prevent breakage and ensure precision, along with a computer-balanced plate that acts to reduce vibration for a better feel and finish.

    3. DEWALT DWX726 Rolling Miter Saw Stand

    Wide adjustable infeed and outfeed work supports provide up to 8′ of material support

    By :- DEWALT

  • View largerView largerDurable Work Support StandDEWALT’s DWX726 Rolling Miter Saw/Planer Stand allows for easy jobsite mobility thanks to its wide rubber wheels and fold-up design.
  • With three-position pneumatically assisted raising and lowering, the DWX726 is easy to assemble to minimize downtime.
  • The mounting rails are easily adjustable, and they can adapt to nearly any miter saw on the market.
  • Weighing a manageable 67 pounds, the stand is 98 inches long and 32.
  • To save space, the unit folds vertically and measures only 59.
  • DEWALT tools can be found nationally and internationally, wherever tools are sold.
  • The DWX726 is designed for a variety of contractors including cabinetmakers, trim carpenters, framers, installers and many other professionals who are tasked with using a miter saw on the jobsite.
  • The unit is also durable with a tubular steel construction that allows for 300 pounds of maximum weight capacity.
  • Additionally, the stand offers wide adjustable infeed and outfeed work supports, which provide up to 8 feet of material support.
  • Key Specifications Tool Width – Extended: 98 inches Tool Height – Extended: 32.
  • With more than 1,000 factory-owned and authorized locations, DEWALT has one of the most extensive service and repair networks in North America.
  • 5 inches Tool Height – Folded: 17 inches Tool Weight: 67 pounds Shipping Weight: 75 pounds About DEWALTDEWALT is a leading manufacturer of industrial power tools and accessories, including corded and cordless drills, saws, hammers, grinders, routers, planers, plate joiners, sanders, lasers, generators, compressors, nailers, saw blades, metal and masonry drill bits, abrasives, screw driving accessories and more.

    4. Collins Miter Spring Pliers And 4 Miter Clamp Kit – Proudly Made In The USA

    Pliers and 4 spring miter clamps included

    By :- Collins Tool Company

  • Whether you are applying moldings and trim or whipping up a run of picture frames one of the biggest hassles in gluing up mitered corners is keeping them from opening up.
  • The clamps spread up to approximately 2, so they will cover most trim sizes and any compound miter.
  • They will really save your hands, plus the Pliers place clamps exactly where you want them, and help keep you from scratching stock when you remove them.
  • Spring clamps are the quickest and easiest way to do it and the Collins Spring Clamp System is one of the most economical we’ve ever come across.
  • The clamps can be applied and removed by hand, but the Spring Pliers make the job much easier.
  • 5. DEWALT DWX724 Compact Miter Saw Stand

    Universal design works with all brands of miter saws

    By :- DEWALT

  • The DEWALT DWX724 compact miter stand has a universal design that works with all brands of miter saws.
  • The 40-Inch beam extends to support up to 10-Feet of material and up to 500 lbs.
  • Tool mounting brackets allow easy and secure mounting of miter saw to the stand.
  • Non-marring feet on tool mount will not scratch material.
  • ) allows for easy transport to and from the jobsite.
  • Legs provide superior support and fold for easy storage and Leg Lock Levers allow for fast and easy set up.
  • The work stops/supports can be repositioned quickly anywhere along the rail.
  • 6. DEWALT DW716XPS Compound Miter Saw With XPS, 12-Inch

    Integrated XPS Cross Cut Positioning System with LED light. No Load Speed 3800 rpm

    By :- DEWALT

  • The XPS system is operated by a simple on/off switch.
  • A powerful 15 amp motor delivers 3,600 RPM for extended power and durability.
  • This saw offers tall sliding fences that support crown molding up to 6-5/8 in.
  • vertically against the fence, while easily sliding out of the way for bevel cuts.
  • Includes: DW716XPS Compound Miter Saw, Carbide Tooth Blade, Dust Bag, Blade Wench.
  • No alignment necessary; change blade, bump / transport.
  • This saw has a high visibility bevel scale that makes bevel adjustments fast and easy.
  • An easy to read scale allows you to make fast independent adjustment of bevel presets, the ability to quickly bevel from side to side, with 9 bevel stops.
  • This DEWALT DW716XPS 12″ Compound Miter Saw features the integrated XPS Cross Cut Positioning System, with an integrated high intensity LED light that casts shadows of the blade to be used like a laser to indicate cut location.

    Additional features on this miter saw include a miter pointer centered in a window for easy visibility, a bevel crown stop that can be reversed for either 52/38 or 45/45 crown, a cam-lock with miter detent override which makes it faster and more accurate, and a louvered guard that allows the user to see the blade.

    7. DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw

    New precise miter system

    By :- DEWALT

  • The DEWALT 12″ Double Bevel Compound Miter Saw is powered by a 15A 3,600 RPM and offers a new precise miter system and machined base fence support for optimal accuracy.
  • Features a new handle design for maximum portability, cam lock miter, detent override, bevel crown stops and is best in class capacity.
  • Carbide blade, dust bag, wrench and manual, 90 day money back guarantee, one year service, three year limited warranty and accessory DW7187 adjustable miter saw laser system included.
  • Constructed for easy, hassle-free use saw’s capacities are miter 0 to 60 degree left, 0 to 50 degree right, bevel 0 to 48 degree left and right, cross cuts 2 x 14 on 90 degree and miters 2 x 10 on 45 degree, base capacity 6-1/2″ left and right with a crown capacity of 6-5/8″.

    Leave a Reply